top of page

FLOW CONTROL

Projects/Flow  Control

Butterfly Valve

​

In the project, the water flow in a butterfly valve was studied using CFD analysis, and the flow coefficient, the forces and moments acting on the disc were calculated.

.

Fire Hydrant (Above Ground) ​

 

In the project, the water flow in an above-ground fire hydrant was studied using CFD analysis, the hydrant flow capacity factor (Kv coefficient), the forces and moments acting on the plug were calculated.

.

Globe Valve

​

In the project, the water flow in a globe valve was examined with CFD analysis, the valve flow capacity factor (Kv coefficient), the forces and moments acting on the plug were calculated.

.

Control Valve

​

In the project, the water flow in a control valve was studied using  CFD analysis, the valve flow capacity factor (Kv coefficient) and the forces acting on the diaphragm were calculated.

.

Y-Type Control Valve

​

In the project, the water flow in a Y-type control valve was studied using CFD analysis, and the valve flow capacity factor (Kv coefficient) and the forces acting on the diaphragm were calculated.

.

Globe Valve

​

In the project, the water flow in a globe valve was examined with CFD analysis, the valve flow capacity factor (Kv coefficient), the forces and moments acting on the plug were calculated.

.

Plastic Control Valve

​

In the project, the water flow in a plastic control valve was studided using CFD analysis, the valve flow capacity factor (Kv coefficient) and  the forces acting on the diaphragm were calculated.

.

Butterfly Valve

​

​In the project, the water flow in a butterfly valve was studied using CFD analysis, and the flow coefficient, the forces and moments acting on the disc were calculated.

.

Balance Valve

​

In the project, the water flow in a balance valve was studied using CFD analysis, the valve flow capacity factor (Kv coefficient), the forces and moments acting on the plug are calculated as function of inlet pressure and flow rate.

.

Fire Hydrant (Above Ground) ​

 

In the project, the water flow in an above-ground fire hydrant was studied using CFD analysis, the hydrant flow capacity factor (Kv coefficient), the forces and moments acting on the plug were calculated.

.

Fire Hydrant (Underground) ​

 

In the project, the water flow in an underground fire hydrant was studied using CFD analysis, the hydrant flow capacity factor (Kv coefficient), the forces and moments acting on the plug were calculated.

.

Dynamic Balance Valve

​

In the project, the water flow in a dynamic balance valve was studied using CFD analysis, the valve flow capacity factor (Kv coefficient), the forces and moments acting on the plug were calculated as a function of inlet pressure and flow rate.

.

Pressure Relief Valve

​

In the project, the gas flow in a pressure relief valve was studied using CFD analysis,  Depending on the pressure, the gas flow rate that can be discharged from the valve was calculated, and the discharge capacity was improved by making design changes.

.

Air Relief Valve

​

In the project, the air flow in an air release valve (suction cup) was studied by CFD analysis,  The air flowrate that can be discharged from the valve was calculated.

.

Check Valve ​

 

In the project, the water flow in a check valve was examined by CFD analysis, the flow capacity factor (Kv coefficient) depending on the damper angle, the forces acting on the disc,  moments and   flow rates were calculated.

.

bottom of page